Honda 2004 Odyssey Service Manual page 831

Shafts and Clutches
Clutch Disassembly (cont'd)
5. Set the special tool (A) on the spring retainer (B) of
the 1st and 2nd clutches so the special tool contacts
the clutch return spring (C).
6. If either end of the special tool is set over an area of
the spring retainer which is unsupported by the
return spring, the retainer may be damaged.
14-218
7. Compress the spring until the snap ring can be
removed.
A
B
C
8. Remove the snap ring (A). Then remove the special
tool (B), spring retainer (C) and return spring.
B
A
C