Honda 2004 Odyssey Service Manual page 722

10. Shift to any position other than D4.
11. Measure the voltage between PCM connector
terminals C13 and A25 or A26.
PCM CONNECTORS
A (31P)
LG1 (BRN/BLK)
LG2 (BRN/BLK)
Wire side of female terminals
Is there about 5 V ?
YES Go to step 12.
NO Check for a short in the wire between PCM
connector terminal C13 and the transmission range
switch or A/T gear position indicator. If the wire is
OK, check for loose terminal fit in the PCM
connectors. If necessary, substitute a known-good
PCM and recheck.
C (22P)
ATP D4 (YEL)
12. Shift to any position other than D3.
13. Measure the voltage between PCM connector
terminals C4 and A25 or A26.
PCM CONNECTORS
A (31P)
LG2 (BRN/BLK) LG1 (BRN/BLK)
Wire side of female terminals
Is there battery voltage?
YES Go to step 14.
NO Check for a short in the wire between PCM
connector terminal C4 and the transmission range
switch or A/T gear position indicator. If the wire is
OK, check for loose terminal fit in the PCM
connectors. If necessary, substitute a known-good
PCM and recheck.
ATP D3 (PNK)
C (22P)
(cont'd)
14-109