Valve Body
Servo Body Disassembly, Inspection, and Reassembly
1. Clean all parts thoroughly in solvent or carburetor cleaner, and dry them with compressed air. Blow out all
passages.
2. Check all valves for free movement. If any fail to slide freely, refer to Valve Body Repair (see page 14-158).
3. Replace the valve body as an assembly if any parts are worn or damaged.
4. Coat all parts with ATF during assembly.
S H I F T V A L V E A
SPRING SPECIFICATIONS
No.
Spring
Standard (New) Unit: mm (in.)
No.
Spring
Wire Dia.
O.D.
Free Length
No. of Coils
®
Shift valve B spring
0.8 (0.031)
7.1 (0.280)
40.4(1.591)
16.9
®
Shift valve A spring
0.8 (0.031)
7.1 (0.280)
40.4(1.591)
16.9
®
CPC valve A spring
0.7 (0.028)
6.1 (0.240)
17.8 (0.701)
7.9
®
CPC valve B spring
0.7 (0.028)
6.1 (0.240)
17.8 (0.701)
7.9
©
3rd accumulator spring
3.8 (0.150)
19.6 (0.772)
59.8 (2.354)
7.8
®
4th accumulator spring
3.8 (0.150)
19.6 (0.772)
59.8 (2.354)
7.8
14-164