Low Fuel Indicator Test
1. Do the fuel gauge sending unit test
(see page 11-234).
• If the system is OK, go to step 2.
• If the system has any malfunction, repair it.
2. Turn the ignition switch ON (II) with the float at the
E (EMPTY) position.
• If the low fuel indicator is on, go to step 3.
• If the low fuel indicator is not on, refer to the low
fuel indicator circuit diagram (see page 22-96)
and check the circuit.
3. Move the float above the LOW position.
• If the low fuel indicator goes off, the system is OK.
• If the low fuel indicator is still on, refer to the low
fuel indicator circuit diagram (see page 22-96)
and check the circuit.
11-235