Stapler Unit - Konica Minolta bizhub 362 Service Manual

Field Service Ver. 1.0 Dec. 2008
[7]
[5]
[11]
[10]
4.3.6

Stapler Unit

1. Remove the Saddle Unit.
See P.7
2. Remove the Paper Output Tray.
See P.5
3. Remove the Front Cover.
See P.5
4. Remove the Rear Cover.
See P.6
5. Remove the Upper Cover.
See P.6
[4]
[3]
[2]
6. Remove two screws [5], and remove
the Horizontal Transport Lower Front
Cover [6].
NOTE
[6]
• At reinstallation, first fit the claw [7]
into position.
A0PGF2C501DA
7. Unplug the connector [8].
[8]
A0PGF2C502DA
8. Remove the Shoulder Screw [9] and
[9]
the screw [10], and remove the Fold-
ing Unit [11].
A0PGF2C503DA
6. Remove the screw [1], and remove
the ground terminal [2].
7. Remove two screws [3], and remove
the holder [4].
[3]
[1]
4511F2C513DA
4. Other
9