14.2 Initial Mode Function Tree; 14.3 Settings In The Initial Mode; Total Clear - Konica Minolta bizhub 362 Service Manual

Field Service Ver. 1.0 Dec. 2008

14.2 Initial Mode Function Tree

Total Clear

*2
Touch Panel Adjustment
Marketing Area
Image Data Clear
Clear FAX Setting
*2
Date/Time Setting
*1
Trouble Reset
*1: For details, see FK-503 Service Manual.
*2: If enhance security mode is set ON, menu is not shown.

14.3 Settings in the Initial Mode

NOTE
• Be sure to turn the main power switch OFF and ON after the Initial mode has been
completed.
14.3.1 Total Clear
• To clear all data.
Functions
* If enhance security mode is set ON, menu is not shown.
The following settings are cleared.
• Fax-related setting information
• Bulletin board setting information
• Transmission/reception log information
• Image data
• Network setting information
• Destination information
• Soft switch information
Use
• Management-by-account setting information
• User authentication setting information
• Account/user counter
• Remote maintenance setting information
• FW download setting information
• Copy setting information (zoom ratio, paper size, erase width, paper source detailed
information, copy job program, bypass free size registration, etc.)
• CSRC setting information
1. Touch [Total Clear] from the Initial mode screen.
Setting/ 2. Select [Yes] and touch [Enter] to start the clearing sequence.
Procedure 3. When the message indicating completion of the clearing sequence appears, touch
[OK].
Initial Mode
14. Initial Mode
Ref.
page
P.225
P.226
P.226
P.226
P.227
P.227
P.227
225