Konica Minolta bizhub 362 Service Manual page 184

Field Service Ver. 1.0 Dec. 2008
F. Delete Job
Functions
• To delete all confidential print jobs.
Use
Setting/ 1. Touch the [Delete Job].
Procedure 2. Select [Yes] and touch [Enter].
G. Memory Management
NOTE
• If optional Hard Disk (HD-504) is mounted, memory management display is
changed to [HDD management].
(1) Overwrite All data
Functions • To delete the date stored in the memory and initialize the registered and set data
Use • To delete and initialize the data in the memory.
1. Make sure 2 minutes passed since the main power has been turned ON.
2. Press [Memory Management].
Setting/
3. Press [Overwrite All data].
Procedure
4. Select [YES] and press [Enter].
5. Turn off the main power, wait for 10 seconds or more and turn on the power.
H. HDD Management
NOTE
• If optional Hard Disk (HD-504) is unmounted, memory management display is
changed to [Memory Management].
(1) Overwrite All data
• To overwrite all data in Hard Disk.
Functions
* It takes 35 hours to complete all data delete.
• To be used for disposing the hard disk or etc.
• The overwrite procedures are as follows.
Use
Overwrite with 0x00 → Overwrite with 0xff → Overwrite with 0x00 → Overwrite with 0xff
Overwrite with 0x00 → Overwrite with 0xff → Overwrite with 0xaa → Verification
1. Make sure 2 minutes passed since the main power has been turned ON.
Setting/
2. Press [HDD Management].
Procedure
3. Select [Overwrite All Date] and press [Enter].
8. Utility/Counter Mode
145