Software Sw Setting For Cs Remote Care - Konica Minolta bizhub 362 Service Manual

Field service
Hide thumbs Also See for bizhub 362:
Table of Contents

Advertisement

Field Service Ver. 1.0 Dec. 2008
10.10.3

Software SW setting for CS Remote Care

NOTE
• In case you changed bit data by accident, be sure to restore the previous state.
A. Input procedure
1. Select [
Tech. Rep. Mode
Switch Setting].
2. Touch [Mode Selection], and input the SW number (two digits) using the 10-Key Pad.
3. Touch [Bit Selection], and select SW bit number using the arrow keys, and input 0 or 1
using the 10-Key Pad.
(For setting by hexadecimal numbers, touch [HEX Selection], and input using the 10-
Key Pad or A to F keys.)
4. Touch [Enter].
NOTE
• About functions of each switch, see to "B. List of software SW for CS Remote
Care."
B. List of software SW for CS Remote Care
SW No.
01
• Dial Mode, Line for send only, Baud rate
• Emergency transmission, Date specified transmission, Call parts replace
date, Call drum replace date, Call regular service date(PM), Auto call on
02
the IC Life, Auto call of the IR shortage, Auto call on the zero reset of the
fixed parts replacement
• Trouble display setting, Auto call on the toner empty, Auto call on the waste
03
toner bottle full
04
• CS Remote Care communication mode
05
• Modem redial interval
06
• Modem redial times
07
• Redial for response time out
08
• Retransmission interval on E-Mail delivery error
09
• Retransmission times on E-Mail delivery error
10
• Time zone settings
• Timer 1
11
RING reception → CONNECT reception
• Timer 2
12
Dial request completed → CONNECT reception
13
• Reservation
• Timer 4
14
Line connection → Start request telegram delivery
• Timer 5
15
Wait time for other side's response
16
• Reservation
17
• Reservation
• Attention display
18
To set weather to give the alarm display when using the modem but the
power for the modem is OFF.
19
• Email/http communication mode
] → [CS Remote Care] → [Detail Setting], and touch [Software
Functions
10. Tech. Rep. Mode
Ref. Page
P.190
P.191
P.191
P.192
P.192
P.193
P.193
P.193
P.194
P.194
P.194
P.195
P.195
P.195
P.196
P.196
189

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bizhub 282Bizhub 222

Table of Contents