Counter Setting - Konica Minolta bizhub 362 Service Manual

Field Service Ver. 1.0 Dec. 2008
12.3.2

Counter Setting

NOTE
• Counter Setting is valid only when Vender 1 and management device 1 is
mounted.
A. Total Counter
Functions
• To set the counting method for the Total Counter.
Use
• The default setting is "Mode 1".
Setting/
Procedure
• Mode 1: 1 count per copy cycle
• Mode 2, Mode 3: 2 counts according to the paper size and copy mode
B. Large Size
Functions
• To set the counting method for the Size Counter.
Use
• The default setting is "A3/11x17".
Setting/
Procedure
<Count Table for the Total Counter and Size Counter>
Copy Mode
Large Size Counter
Total Counter
Total Counter
Large Size Counter
2-Sided Total Counter
Total by Account
Large Size by Account
C. Copy Kit Counter
Functions
• To select whether to enable or disable the Copy Kit Counter.
Use
• The default setting is "Mode 1".
Setting/
Procedure
• Mode 1: The Copy Kit Counter is disabled.
• Mode 2: Copying continues even after the set value is reached.
• Mode 3: Copying is prohibited after the set value is reached.
"Mode 1" Mode 2
No Count "A3/11x17"
A3/B4/11x17/Legal A3/11x17/B4/11x14/Foolscape/Legal
For 1-sided copies
Non-standard
size
Mode
1 2 3
1
0
0
1
0
"Mode 1" Mode 2
Mode 3
For 2-sided copies
Non-standard
Standard size
size
Mode Mode
1 2 3 1 2
1 2 2 2
1 1 2 0
0 1 1
1 2 2 2
1 1 2 0
Mode 3
12. Meter Count
Standard size
Mode
3 1 2 3
2 4 4
2 2 0
2 1 1 4
2 4 4
2 2 0
215