Konica Minolta bizhub 362 Service Manual page 185

8. Utility/Counter Mode
(2) HDD Lock Setting
NOTE
• Be sure to keep the password in a safe place so that it will not be lost. If the pass-
word is lost, significant restoration operations will be required for recovery.
<Input Password>
Functions • To set password of HDD in order to prevent unauthorized access to HDD.
Use • To set the password of HDD.
1. Press [HDD Management].
2. Press [HDD Lock Setting].
3. Select [Input Password] and press [New Password].
Setting/ 4. Enter 20-digits password and press [Enter].
Procedure 5. Select [Confirm New Password], enter new 20-digits password and press [Enter].
6. Press [Enter].
7. Select [Yes] and press [Enter].
8. Turn off the main power, wait for 10 seconds or more and turn on the power.
<Change Password>
Functions • To change the password of HDD set at Input Password.
Use • To be used for changing HDD password.
1. Press [HDD Management].
2. Press [HDD Lock Setting].
3. Press [Change Password].
4. Enter the present password and press [Enter].
Setting/
5. Select [New Password], enter 20-digits password and press [Enter].
Procedure
6. Select [Confirm New Password], enter new 20-digits password and press [Enter].
7. Press [Enter].
8. Select [Yes] and press [Enter].
9. Turn OFF the main power, wait for 10 seconds or more and turn ON the power.
<Delete Password>
• To delete the password set in HDD.
Functions
* If enhance security is set ON, it's not shown.
Use • To delete the password set in HDD.
1. Press [HDD Management].
2. Press [HDD Lock Setting].
Setting/ 3. Select [Delete Password].
Procedure 4. Enter the present password and press [Enter].
5. Select [Yes] and press [Enter].
6. Turn OFF the main power, wait for 10 seconds or more and turn ON the power.
146
Field Service Ver. 1.0 Dec. 2008