Konica Minolta bizhub 362 Service Manual page 409

6. Utility/Counter Mode
(2) Password Communication
<Communication Password>
• To allow a fax to be received only when there is a match in the password that has previ-
Functions
ously been registered on the transmitter and receiver ends.
Use • When using password reception
• The default setting is "00".
Setting/
Procedure
F. Print Lists
(1) Setting List
Functions
• To print information concerning the initial settings of the machine.
Use
1. Touch the [Print Lists].
Setting/
2. Touch the [Setting List].
Procedure
3. The setting list is printed.
G. Report Settings
(1) TX Report
Functions • To set the mode of output of the report used for confirming results of transmission.
• When changing the mode of output of the report used for confirming results of trans-
Use mission
• Setting is made individually for a single destination and two or more destinations.
<Single Dest>
NOTE
Setting/
• Selecting Authentication device (PageACSES) or Vender 2 for Meter Count Mode
Procedure
will change the display to "OFF".
<Broadcasting>
(2) Activity Report
• To select whether or not to print the activity report for every 50 transactions automati-
Functions
cally.
Use • When printing the activity report for every 50 transactions automatically.
• The default setting is "ON".
Setting/
Procedure
NOTE
• Selecting Authentication device (PageACSES) or Vender 2 for Meter Count Mode
will change the display to "OFF".
22
"00" (Disabled) 01 to 99 (Enabled)
ON "If TX Fails"
ON "If TX Fails"
"ON" OFF
Field Service Ver. 1.0 Dec. 2008
OFF
OFF