Konica Minolta bizhub 362 Service Manual page 253

12. Meter Count
D. Key Counter Only
Functions • To set whether only the key counter (no vender) is mounted or not.
Use • Set when only the key counter is mounted.
• Select [key counter] and touch [END] when the key counter is mounted.
NOTE
Setting/
• This setting is valid only when User Auth setting under the following setting is
Procedure
[OFF], and Account Track is [OFF].
• [Admin. Management] - [Admin. 1] - [Account/User Auth.] - [User Authentication
ON/OFF]
E. Vender 1
Functions • To set whether or not the Vender 1 is installed.
Use • Set when the Vender 1 is mounted.
• The default setting is "(Unset)".
Type 1: Select the message (for Coin vender).
Type 2: Select the message (for Card keeper).
Setting/
Procedure
NOTE
• This setting is valid only when User Auth setting under the following setting is
[OFF], and Account Track is [OFF].
• [Admin. Management] - [Admin. 1] - [Account/User Auth.] - [User Authentication
ON/OFF]
F. Vender 2
Functions • To set whether or not the Vender 2 is installed.
Use • Set when the Vender 2 is mounted.
• The default setting is "(Unset)".
Type 1: Select the message (for Coin vender)
Type 2: Select the message (for Card keeper)
Type 3: Select the message (for Coin vender & Card keeper)
NOTE
• The modem version of the CS Remote Care is not available when the Vender 2 is
Setting/
set.
Procedure
• When set the Vender 2 under the modem version of the CS Remote Care is set,
[RAM Clear] of the CS Remote Care should be conducted.
• When mounting or removing HDD with Vender 2 being selected, Clear FAX Set-
ting (Initial Mode) should be conducted.
• This setting is valid only when User Auth setting under the following setting is
[OFF], and Account Track is [OFF].
[Admin. Management] - [Admin. 1] - [Account/User Auth.] - [User Authentication
ON/OFF]
214
"(Unset)" Type 1
"(Unset)" Type 1
Field Service Ver. 1.0 Dec. 2008
Type 2
Type 2 Type 3