8. Utility/Counter Mode
8.4.7
Toner Supply
• To adjust the set toner-to-carrier level by providing an auxiliary supply of toner when a
Functions
low image density occurs due to a lowered toner-to-carrier ratio after large numbers of
copies have been made of originals having a high image density.
Use
• To replenish the supply of toner in an auxiliary manner.
• Touch [Toner Supply] for the copier to detect the current toner density and, if the den-
Setting/
sity is lower than the standard value, a toner-replenishing sequence, then a developer
Procedure
agitation sequence are performed. If the toner density is detected to be higher than the
standard value, only a developer agitation sequence is performed.
8.4.8
Memory RX ON/OFF
See P.17 of the FK-503 service manual.
8.4.9
POP3 RX
See P.17 of the FK-503 service manual.
128
Field Service Ver. 1.0 Dec. 2008