Konica Minolta bizhub 362 Service Manual page 498

Field Service Ver. 1.0 Dec. 2008
MODE
Bit:
355
Bit Feature
7 Switch 10M and 100M:
Select communication
6
rate of LAN adapter (Net-
work function) *
5 Switch full-duplex and
half-duplex:
Select packet transmit/
receive when connecting
to switching hub.
(Network function) *
4 Automatically obtain IP
address (DHCP) *
NOTE
• The features with (*) are settable by users. *: Screen setting
Factory setting bit
7 6 5 4 3 2 1 0
0 0 1 0 0 0 0 0
Logic
0 1
Bit7-6: 00
01
10
11
Full Half
Duplex Duplex
No Yes
11. Soft Switch Settings
HEX:20
Description
Auto-negoti- • Auto-negotiation:
ation Determine the com-
munication rate by
Set to 100M
identifying 10BASE-T
Set to 10M
or 100BASE-TX.
Not available • Set to 100M: Connec-
tion is set to
100BASE-TX.
• Set to 10M: Connec-
tion is set to 10BASE-
T.
Valid after the power is
turned off and on.
(Will not communicate
when "Set to 100M" or
"Set to 10M" is chosen
and the communication
rate is not correct for the
communication line.
Check and specify the
correct communication
rate for the line.)
This switch is valid when MODE 355 Bit
7 to 6 is set to "Set to 100M" or "Set to
10M".
• Full-duplex: Packets can be sent and
received simultaneously.
• Half-duplex: Packets can be sent or
received separately.
Valid after the main power switch is
turned off and on.
111