Tray 2; Mechanical Control Board Cover - Konica Minolta bizhub 362 Service Manual

6. Other
6.3.13

Tray 2

[3]
[1]
6.3.14

Mechanical Control Board Cover

1. Remove the Upper Rear Cover.
See P.51
2. Remove the Rear Cover.
See P.52
[1]
[4]
58
1. Slide out the Tray 2 [1].
2. Remove the screw [2] and, holding
[2]
A11UF2C503DA
3. Remove five screws [1] and the
[2]
4040F2C561DA
4. Unplug the all connectors.
5. Remove five screws [3] and the
NOTE
[3] • When replacing the Mechanical
Control Board, be sure to replace
the EEPROM.
4040F2C562DA
• When the Mechanical Control Board
has been replaced with a new one,
check the ROM version and
upgrade the firmware to the latest
version.
Field Service Ver. 1.0 Dec. 2008
the stopper [3], remove the Tray 2
[1].
Mechanical Control Board Cover [2].
Mechanical Control Board [4].
See P.111
See P.41