Konica Minolta bizhub 362 Service Manual page 812

Field Service Ver. 1.0 Dec. 2008
[15]
[16]
[17]
[20]
[19]
[18]
[20]
[21]
14. Unplug the connector [13].
15. Remove two screws [14] and two
16. Remove the Tray [16].
[13]
[14]
A0PGF2C505DA
17. Unplug all the connectors on the
18. Remove the PWB support, and then
4511F2C521DA
19. Remove the screw [18], and then
NOTE
• Be careful that when the Mounting
• When installing the spring, install
[22]
screws [15].
Main Control Board.
remove the Main Control Board [17].
remove the Mounting Bracket [19]
and the Lock Release Lever [20].
Bracket [19] is removed, the spring
[21] is also removed.
the end of spring [21] into the gap
[22] between the ribs.
4. Other
11