Maintenance Mode Function Tree; Settings In The Maintenance Mode; Mem. Contents; Memory Dump - Konica Minolta bizhub 362 Service Manual

Field Service Ver. 1.0 Dec. 2008
8.2

Maintenance Mode function tree

NOTE
• Of the Maintenance mode functions, only those related to the fax machine will be
described in the following.
• *1: If enhance security mode is set ON, menu is not shown

Mem. contents

*1

Memory Dump

*1
File Display *1
File Dump *1
Soft Switch Set *1
Touch Panel Adjustment
Protocol Trace
*1
Service Call Report
*1
8.3

Settings in the Maintenance Mode

8.3.1 Mem. contents
Functions • This displays the RAM data of MAIN-CPU on the LCD by specifying its absolute
address which will be provided by our technical department.
Use
* If enhance security mode is set ON, menu is not shown.
1. Call the Maintenance Mode to the screen.
2. Touch the [Mem. contents].
Setting/
3. Type the absolute address from the 10-Key Pad and [A] to [F] and touch [Enter].
Procedure
4. Touch [ ] or [ ] to change the address to be displayed.
5. Touch [Enter] twice.
8.3.2 Memory Dump
Functions • This outputs a report on the RAM data of MAIN-CPU by specifying its absolute address
which will be provided by our technical department.
Use
* If enhance security mode is set ON, menu is not shown.
1. Call the Maintenance Mode to the screen.
2. Touch the [Memory Dump].
3. Touch the [Address].
Setting/
4. Type the absolute address from the 10-Key Pad and [A] to [F] and touch [Enter].
Procedure
5. Touch the [Length].
6. Type the absolute address from the 10-Key Pad and [A] to [F] and touch [Enter].
7. Touch [Enter], and the memory dump sequence is started.
Maintenance Mode
8. Maintenance Mode
Ref.
page
P.29
P.29
P.30
P.30
P.30
P.30
P.31
P.31
29