Konica Minolta bizhub 362 Service Manual page 739

3. Firmware upgrade
8
4. Open the Right Door.
NOTE
• Be sure to open the Right Door
before turning ON the main power
switch.
5. Turn ON the main power switch.
6. Display the Tech. Rep. Mode screen.
See P.154 of the main body service
4349F2E541DA
manual.
7. Touch [Function].
8. Touch [FW Download].
4349F2E542DA
9. Select [Finisher] and touch [Enter].
NOTE
• Touch [Engine] also if the Engine
firmware is to be upgraded at the
same time.
4349F2E543DA
10. Select [Yes] and touch [Enter].
4349F2E544DA
11. The firmware upgrading sequence
will start.
NOTE
• The firmware upgrading sequence
will last for 5 to 6 min. During this
period, NEVER turn off the machine
power.
4349F2E545DA
• If the Engine firmware is also
upgraded, the entire sequence will
take about 10 to 11 min.
Field Service Ver. 1.0 Dec. 2008