Konica Minolta bizhub 362 Service Manual page 444

Field Service Ver. 1.0 Dec. 2008
Bit
1 Select cut off/reduction of
received document:
This bit specifies cutting off
or reducing a received docu-
ment that is longer than the
print paper.
(This feature is enabled when
printing a received docu-
ment.) <*>
If the document will not fit
within a printable range at the
maximum reduction ratio
specified here, the excess
length portion is divided.
0 Printing specification of
received document.
NOTE
• The features with (*) are settable by users. *: Screen setting <*>: Soft switch setting
Feature
0
Reduc-
tion
First
page.
11. Soft Switch Settings
Logic
1
Cut off This bit determines that the received
document will be cut off with "Select
upper limit of cut off length after print-
ing (MODE 007 Bit 7 to 5)" or
reduced with "Select upper limit of
reduction ratio of received document
(MODE 007 Bit 4 to 2)."
All
pages.
Description
57