Fax Over Ip Communication Error (Receiving) - Konica Minolta bizhub 362 Service Manual

12. Troubleshooting
Error
Error Details
Code
7D Reception command
error (not carrier dis-
connection)
7F No destination
response after chang-
ing mode (T1 timeout)
8F PIN reception for post
message
12.2.16

FAX over IP Communication Error (Receiving)

Error
Error Details
Code
33 Protocol error during
V.34 sequence
91 T1 timeout during ini-
tial recognition signal
reception waiting
92 DCN reception dur-
ing waiting for com-
mand other than DCN
in Phase B
192
Possible Cause
Dest. Line Self
V.34 failure
Destination
machine failure
Line failure
(packet loss,
delay, etc.)
Destination
machine failure
Line failure
(packet loss,
delay, etc.)
Destination
machine failure
Line failure
(packet loss,
delay, etc.)
Possible Cause
Dest. Line Self
V.34 failure
Destination
machine failure
Line failure
(packet loss,
delay, etc.)
Destination
machine failure
Line failure
(packet loss,
delay, etc.)
V.34 failure
Destination
machine failure
or disconnection
Line failure
(packet loss,
delay, etc.)
Field Service Ver. 1.0 Dec. 2008
Action to be Taken
Set V.34 to OFF and the signal
transmission level to -16dBm, and
send again.
Change the destination machine
and send again.
Confirm the status of the network
(HUB connection, etc.)
Change the destination machine
and send again.
Confirm the status of the network
(HUB connection, etc.)
Change the destination machine
and send again.
Confirm the status of the network
(HUB connection, etc.)
Action to be Taken
Set V.34 to OFF and the signal
transmission level to -16dBm, and
send again.
Change the destination machine
and send again.
Confirm the status of the network
(HUB connection, etc.)
Change the destination machine
and send again.
Confirm the status of the network
(HUB connection, etc.)
Set V.34 to OFF and the signal
transmission level to -16dBm, and
send again.
Send again to the destination
machine.
Confirm the status of the network
(HUB connection, etc.)