11. Service Security Mode; 11.1 Service Security Mode Function Setting Procedure; Procedure; Exiting - Konica Minolta bizhub 362 Service Manual

Field Service Ver. 1.0 Dec. 2008

11. Service Security Mode

11.1 Service Security Mode Function Setting Procedure

11.1.1

Procedure

1. Call the Tech. Rep. Mode to the screen.
2. Press the following keys in this order.
Stop → 0→ Clear Key
3. Select a function.
11.1.2

Exiting

• Press the Reset Key.

11.2 Service Security Mode Function Tree

Service Security Mode

11.3 Settings in the Service Security Mode

11.3.1

Service Code Change

Functions • To change the service code used to access the Tech. Rep. mode, Initial mode, and
Maintenance mode.
* To set enhance security mode ON, change the default service code to 8 digits code that
Use
is not using all the same numbers.
1. Call the Service Security mode from the Tech. Rep. mode and then touch [Service
Code Change].
2. Touch [Current Code] and enter the currently set 8-digit service code.
Setting/
3. Touch [New Code] and enter a new 8-digit service code.
Procedure
4. Touch [Retype New Code] and enter the new 8-digit service code once again.
• The "#" and "*" keys may be used in combination with the 10-Key Pad for entry of the
service code.
Tech. Rep. Mode
Service Code Change
11. Service Security Mode
4040F3E552DA
Ref.
page
P.211
211