Test Print; Check Detail - Konica Minolta bizhub 362 Service Manual

Field Service Ver. 1.0 Dec. 2008
8.7.4

Test Print

• To output the report or Demo Page concerning the print setting.
NOTE
Functions • When Vender 2 is selected for Meter Count Mode, the Test Print key will be under
the following setting.
• [Admin. 2] - [Printer Setting] - [Test Print]
• To check the setting concerning the printer.
The types of report available for output are as follows.
Use Check Job Details: The list of printer setting will be output.
PCL Demo Page: PCL Demo page will be output.
PS Font List: PS Font List will be output.
PCL Font List: PCL Font List will be output.
1. Press the Utility/Counter key, and then touch [Printer Setting] and [Test Print] in that
Setting/
order.
Procedure
2. Touch the test print key, for which test print is to be produced.
8.8

Check Detail

Functions
• To check the counter reading or display a list of counters.
Use
Setting/ 1. Press the Utility/Counter key.
Procedure 2. Touch the [Check Detail].
8. Utility/Counter Mode
151