Replacing The Pick-Up Roller - Konica Minolta bizhub 362 Service Manual

2. Periodical check
[19]
[16]
[21]
NOTE
• Replace the Separation Roller Assy, Paper Take-up Roller and Pick-up Roller at the
same time.
2.1.3

Replacing the Pick-up Roller

6
[17]
[18]
A0RCF2C509DA
[20]
A0RCF2C510DA
[1]
4348F2C502DA
[3]
[2]
[2]
[2]
A0RCF2C501DA
Field Service Ver. 1.0 Dec. 2008
11. Remove C-ring [16], E-rings [17] and
the bushing [18], and remove the
Pick-up Roller Fixing Bracket Assy
[19].
12. Remove the C-ring [20] and remove
the Paper Take-up Roller [21].
13. Repeat steps 1 to 12 similarly for the
4th Drawer.
1. Remove the Rear Right Cover.
(Remove the Right Lower Cover for
4th row.)
See P.10
2. Remove the Tray3.(Remove the
Tray4 from 4th row.)
3. Remove the Paper Separation Roller
Mounting Bracket Assy.
See steps 1 to 3 of "Replacing the
Separation Roller Assy" on P.3.
4. Disconnect the connector [1] and
remove the harness from two wire
saddles.
5. Remove four screws [2] and remove
the Paper Take-up Unit [3].