Konica Minolta bizhub 362 Service Manual page 61

3. Periodical check
[7]
[11]
[9]
[13]
[14]
[16]
22
3. Remove the Connector [6].
[6]
4. Remove two screws [7] and the Tray
[8]
A11UF2C502DA
5. Remove four screws [9] and the Tray
[10]
[9]
4040F2C512DA
[12]
6. Remove two C-clips [12] and two
[13]
4040F2C517DA
7. Remove one C-clip [15] and the Tray
[15]
8. To reinstall, reverse the order of
9. Select [Tech. Rep. Mode] →
4040F2C518DA
Field Service Ver. 1.0 Dec. 2008
1 Feed Roller Assy [8].
1 Feed Roller Assy Cover [10] and
the Tray 1 Separator Roll Assy [11].
bearings [13]. Then, remove the
Pick-up Roller Assy [14].
1 Pick-up Roller [16].
removal.
[Counter] → [Special Parts Counter]
→ [Tray 1] and clear the counter.