Konica Minolta bizhub 362 Service Manual page 197

10. Tech. Rep. Mode
D. Dry Key Set
• To select whether or not the [Dehumidify] button is available on the User Management
Functions
screen of the Utility/Counter mode.
• When the image density is low
<Scanner>
• The [Dehumidify] button appears and the operation is performed only for the scanner.
<Scanner/Drum>
Use
• The [Dehumidify] button appears and the operation is performed for both the scanner
and the PC Drum.
<Disable>
• The [Dehumidify] button does not appear.
• The default setting is "Scanner/Drum".
Setting/
Procedure
E. Function Limit
Functions • To select whether or not access to some of the copy functions is restricted.
Use • To disable some of the copy functions.
• The default setting is "OFF".
Setting/
Procedure
F. [✱] (Special image setting)
Functions • To select whether or not to display the special image [✱] key on the Density screen.
• Highlight the [✱] key on the Density screen and then select the appropriate mode to
produce a special image output.
• When Photo mode is selected: Low density mode
Use • When Text mode is selected: The image density level is increased two steps higher
than in the ordinary Text mode.
• When Text/Photo mode is selected: The image density level is increased one step
higher than in the ordinary Text mode.
<[✱] highlighted>
• The special image key is displayed on the Density screen.
Setting/
Procedure
<[✱] not highlighted>
• The special image key is not displayed on the Density screen.
158
Scanner "Scanner/Drum"
ON "OFF"
Field Service Ver. 1.0 Dec. 2008
Disable