Konica Minolta bizhub 362 Service Manual page 567

12. Troubleshooting
Code Description
9D • RX command error (with-
out cutting off carrier)
9F • Interrupted page reception
by EOR-Q or EOR-PRI-Q
signal from sender in ECM
procedure (next page may
be received completely
because ECM procedure
runs continuously)
180
Cause
Re Li Lo
Failure in remote
machine
Failure in remote
machine
Line failure
Field Service Ver. 1.0 Dec. 2008
Remedy
Check the status of the
remote machine.
Try another remote machine.
Reduce the initial transmis-
sion speed and try resending.