Settings In The Reports; Tx Report; Rx Report - Konica Minolta bizhub 362 Service Manual

6. Utility/Counter Mode
6.5.2 Admin. 2
A. Network Settings
(1) Network Setting 2
<SIP-FAX Settings>
• To set whether or not to use SIP-FAX function.
• To enter SIP-FAX addresses.
Functions
NOTE
• SIP-FAX Settings screen is displayed only when [YES] is selected for [FAX set] -
[SIP-FAX Function] in Tech. Rep. Mode.
Use • To enable SIP-FAX function.
1. Touch the [SIP-FAX Settings].
2. Touch the [YES].
Setting/
3. Touch [SIP-Adaptor Address] and enter the address of the SIP adaptor.
Procedure
4. Touch the [Enter].
5. Turn off the main power, wait for 10 seconds or more and turn on the power.
6.6

Settings in the Reports

NOTE
• It is shown on [Print List] in [Admin. 1] when security mode is set ON.
• When selecting the Vender 2 for Meter Count Mode, it is shown on [Print List] in
[Admin.1] and the print list key is not accepted.
• But it is acceptable when the key counter is inserted.
6.6.1

TX Report

Functions
• To print the latest 50 transmission information.
Use
1. Press the Utility/Counter Key.
Setting/ 2. Touch the [Reports].
Procedure 3. Touch the [TX Report].
4. A TX report will be printed.
6.6.2

RX Report

Functions
• To print the latest 50 reception information.
Use
1. Press the Utility/Counter Key.
Setting/ 2. Touch the [Reports].
Procedure 3. Touch the [RX Report].
4. A RX report will be printed.
24
Field Service Ver. 1.0 Dec. 2008