10.9 Settings In The Operation Check; Adf; Exp. Lamp Check; Scanner - Konica Minolta bizhub 362 Service Manual

Field Service Ver. 1.0 Dec. 2008

10.9 Settings in the Operation Check

10.9.1

ADF

A. Paper Passage
Functions • To let the document loaded in the ADF be fed through under the specified mode.
• 1-sided No Detect
Use
• Double-Sided
1. From the Tech. Rep. Mode screen, touch [Operation Check] → [ADF] → [Paper Pas-
sage] in that order.
2. Select the mode.
Setting/
3. Load the document in the ADF and press the Start key.
Procedure
4. When the Start key is then pressed, the paper passage operation is temporarily halted.
Pressing the Stop key brings the paper passage operation to an immediate stop. The
operation is stopped as soon as all pages of the document have been fed through.
B. ADF Sensor Adjust
Functions
• To carry out automatic adjustments of the ADF sensor.
Use
1. From the Tech. Rep. Mode screen, touch [Operation Check] → [ADF] → [ADF Sensor
Setting/
Adjust] in that order.
Procedure
2. Press the Start key to begins the automatic adjustment of the sensors.
C. Backup Data Initialization
Functions
• Resets the settings specified with Sensor Auto Adjust.
Use
1. From the Tech. Rep. Mode screen, touch [Operation Check] → [ADF] → [Backup Data
Setting/
Initialization] in that order.
Procedure
2. Select [Yes] and touch [Enter] to initialize the backup data.
10.9.2

Exp. Lamp Check

Functions
• To check the intensity of the Exposure Lamp in the Image Reading Section.
Use
1. From the Tech. Rep. Mode screen, touch [Operation Check] → [Exp. Lamp Check] in
Setting/
Procedure that order.
10.9.3

Scanner

Functions • To check the operation of the Scanner.
• Turns on the Exposure Lamp.
Use
• Moves the Scanner.
1. From the Tech. Rep. Mode screen, touch [Operation Check] → [Scanner] in that order.
Setting/
Procedure 2. Use the Keypad to type in the amount to move, and then touch [Set].
10. Tech. Rep. Mode
185