Konica Minolta bizhub 362 Service Manual page 178

Field Service Ver. 1.0 Dec. 2008
Authentication Setting
Functions • To make settings for authentication.
• General Settings: Use to select the LDAP authentication method.
• Login name: Use to set the logon name for authentication.
Use
• Password: Use to set the password for authentication.
• Domain Name: Use to set the domain name for authentication by GSS-SPNEGO.
<General Settings>
• The default setting is "Anonymous".
<Login name>
1. Touch the [Login name].
2. Enter the logon name from the 10-Key Pad or the keyboard on the screen and then
touch [Enter].
Setting/
Procedure
<Password>
1. Touch the [Password].
2. Touch [New Password], enter the password, and then touch [Enter].
3. Touch [Confirm New Password], enter the password once again, and then touch
[Enter].
<Domain Name>
1. Touch the [Domain Name].
2. Enter the domain name from the 10-Key Pad or the keyboard on the screen and then
touch [Enter].
Maximum number of search
Functions
• To change the maximum number of search items for LDAP search.
Use
• The default setting is "100".
Setting/
Procedure
Connection time out
Functions
• To change the connection time out for the LDAP server.
Use
• The default setting is "60 sec".
Setting/
Procedure
SSL/TLS
• To set whether or not to use SSL/TLS during communications carried out with the
Functions
LDAP server.
Use • To use SSL/TLS during communications carried out with the LDAP server.
• The default setting is "OFF".
Setting/
Procedure
"Anonymous" Simple
GSS-SPNEGO
5 to 100
5 to 300
ON "OFF"
8. Utility/Counter Mode
Digest-MD5/CRAM-MD5
139