Replacing The Separation Roller - Konica Minolta bizhub 362 Service Manual

2. Periodical check
[11]
[14]
[12]
[13]
[15]
2.1.2

Replacing the Separation Roller

[1]
[2]
[5]
6
9. Remove the C-ring [11], and remove
10. Remove two pins [14].
11. Remove the Feed Roller [15].
NOTE
• Use care not to lose the pin.
4344F2C504DA
1. Open the Upper Door [1].
4344F2C500DA
2. Hold the [2] sections in the figure,
[2]
[3]
4344F2C505DA
3. Remove the Separation Roller Assy
[4]
NOTE
• Use care not to lose the spring at
4344F2C506DA
4. While opening up the holder [5],
NOTE
• Opening the holder too much can
[6]
4344F2C507DA
Field Service Ver. 1.0 Dec. 2008
the gear [12] and the bushing [13].
and remove the cover [3].
[4].
the bottom side of the Separation
Roller Assy.
remove the shaft [6].
break the holder.