Drawer; Wire - Konica Minolta bizhub 362 Service Manual

Field Service Ver. 1.0 Dec. 2008
3.3.3

Drawer

[3]
[4]
[5]
3.3.4

Wire

[1]
[4]
[3]
[2]
[1]
A0RCF2C506DA
[4]
[6]
4348fs2523c0
[7]
[7]
A0RCF2C507DA
[3]
[1]
[2]
A0RCF2C508DA
[4]
[5]
4348fs2526c0
1. Press the Drawer Eject Button [1]
and slide out the drawer [2].
2. Remove the paper.
3. Remove four screws [3] and slide out
the drawer [2].
4. Remove two screws [4], the connec-
tor [5], and remove the Connector
Board [6].
5. Remove the Drawer.
NOTE
• When removing the Connector
Board, use care not to drop the
drawer from the guide rail.
CAUTION
• To prevent injuries, press the guide
rail [7] inside the machine.
1. Remove the Drawer.
See P.11
2. Remove four screws [1] and remove
the Front Cover Assy [2].
3. Unplug the connector [3].
4. Remove two screws [4] and the Inner
Cover Assy [5].
NOTE
• Do not peel off pulley protective
mylar sheet.
3. Other
11