Konica Minolta bizhub 362 Service Manual page 828

Field Service Ver. 1.0 Dec. 2008
[82]
[83]
[87]
[84]
[86] [85]
A0PGF2C532DA
[88]
A0PGF2C533DA
• Be careful not to confuse the Guide
Plate Gear/LtRr [82], /LtFr [83], /
RtRr [84] and /RtFr [85]. The out-
ward appearance is identical for the
Guide Plate Gear/LtFr [83], /RtRr
[84] and /RtFr [85]. However, the
mark [86] is provided on the Guide
Plate Gear/RtFr [85]. Install claw in
facing.
• Be careful not to confuse the direc-
tions of Lower Guide Plate/Lt [87]
and /Rt [88]. Be sure to install the
direction (as seen from the front of
device) as shown in the figure.
4. Other
27