FN-9/FN120 Ver.1.0 Sep 2003
5. STAPLER
5.1
Removing and reinstalling of
the stapler unit cover
Caution:
• Be careful when you detach the FNS from the
main body. If you pull out the stacker unit, the
FNS may fall. This may cause injury.
A. Procedure
1. Open the finisher door.
2. Pull out the stacker unit [1].
3. Remove 2 rail stopper screws [1] and pull out
the stacker unit [2].
Note:
• To prevent the FNS from falling down, be sure
to put a support [3] under the stacker unit.
[1]
[1]
[2]
[3]
1-179
fs2153037
[1]
fs2153038