Replacing The Pick-Up Roller/Paper Feed Roller/Paper Feed Assist Roller; Replacing The Separation Roller/Torque Limiter - Konica Minolta DF-606 Service Manual

2. PERIODIC CHECK
2.1.2

Replacing the separation roller/torque limiter

A. Periodically replaced parts/cycle
• Separation roller: Every 2,000,000 prints (once for every 400,000 prints for actual replacement cycle)
• Torque limiter: Every 4,500,000 prints (once for every 800,000 prints for actual replacement cycle)
B. Procedure
8
[1] [2]
15saf2c008na
Field Service Ver1.0 Jun.2005
1. Remove the pick-up roller unit. (See "2.1.1
Replacing the pick-up roller/paper feed roller/
paper feed assist roller.")
2. Remove 2 screws [1] and then remove the assist
roller assembly [2].