D-Link xStack DGS-3120 Series Cli Reference Manual page 577

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
information for all ports will be displayed.
Restrictions
None.
Example
To display statistics information of port 1:
DGS-3120-24TC:admin#
Command: show lldp statistics ports 1:1
Port ID: 1
------------------------------------------------------------------------
lldpStatsTxPortFramesTotal
lldpStatsRxPortFramesDiscardedTotal
lldpStatsRxPortFramesErrors
lldpStatsRxPortFramesTotal
lldpStatsRxPortTLVsDiscardedTotal
lldpStatsRxPortTLVsUnrecognizedTotal : 0
lldpStatsRxPortAgeoutsTotal
DGS-3120-24TC:admin#
53-14 config lldp_med fast_start repeat_count
Description
This command is used to configure the fast start repeat count. When an LLDP-MED Capabilities
TLV is detected for an MSAP identifier not associated with an existing LLDP remote system MIB,
the application layer shall start the fast start mechanism and set the 'medFastStart' timer to
'medFastStartRepeatCount' times 1. The default value is 4.
Format
config lldp_med fast_start repeat_count <value 1 - 10>
Parameters
<value 1-10> - Specify a fast start repeat count value between 1 and 10. The default value is 4.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure a LLDP-MED fast start repeat count of 5:
show lldp statistics ports 1:1
572
: 27
: 0
: 0
: 27
: 0
: 0