D-Link xStack DGS-3120 Series Cli Reference Manual page 493

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
Format
download address_binding snoop_entry_fromTFTP [<ipaddr> | <ipv6addr> | <domain_name
255>] filename <path_filename 64>
Parameters
<ipaddr> - Enter the IPv4 address of the TFTP server here.
<ipv6addr> - Enter the IPv6 address of the TFTP server here.
<domain_name 255> - Enter the domain name of the TFTP server here. This name can be up to
255 characters long.
filename - Specify the path of the file to the TFTP server.
<path_filename 64> - Enter the file path, to the TFTP server, here.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To download the DHCP snooping binding table:
DGS-3120-24TC:admin# download address_binding snoop_entry_fromTFTP 10.90.90.6
filename impb.cfg
Command: download address_binding snoop_entry_fromTFTP 10.90.90.6 filename
impb.cfg
Connecting to server................... Done.
Download DHCP Snooping Entry................ Done.
DGS-3120-24TC:admin#
43-33 upload address_binding snoop_entry_toTFTP
Description
This command is used to upload DHCPv4 Snooping binding entries by TFTP.
Format
upload address_binding snoop_entry_toTFTP [<ipaddr> | <ipv6addr> | <domain_name 255>]
filename <path_filename 64>
Parameters
<ipaddr> - Enter the IPv4 address of the TFTP server here.
<ipv6addr> - Enter the IPv6 address of the TFTP server here.
<domain_name 255> - Enter the domain name of the TFTP server here. This name can be up to
255 characters long.
filename - Specify the path of the file located on the TFTP server.
<path_filename 64> - Enter the file path, located on the TFTP server, here.
488