D-Link xStack DGS-3120 Series Cli Reference Manual page 570

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
mode - (Optional) Specify the display mode.
brief - Display the information in brief mode.
normal - Display the information in normal mode. This is the default display mode.
detailed - Display the information in detailed mode.
Restrictions
None.
Example
To display outbound LLDP advertisements for port 1 in detailed mode. Port description on the
display should use the same value as ifDescr.
DGS-3120-24TC:admin#show lldp local_ports 1:1 mode detailed
Command: show lldp local_ports 1:1 mode detailed
Port ID : 1:1
-----------------------------------------------------------------------------
Port ID Subtype
Port ID
Port Description
Port PVID
Management Address Count
Subtype
Address
IF Type
OID
Subtype
Address
IF Type
OID
PPVID Entries Count
(None)
VLAN Name Entries Count
Entry 1 :
VLAN ID
VLAN Name
Protocol Identity Entries Count
(None)
MAC/PHY Configuration/Status
Auto-Negotiation Support
Auto-Negotiation Enabled
Auto-Negotiation Advertised Capability : 6c01(hex)
Auto-Negotiation Operational MAU Type
Link Aggregation
Aggregation Capability
Aggregation Status
: MAC Address
: 00-01-02-03-04-01
: D-Link DGS-3120-24TC R2.00.010
Port 1 on Unit 1
: 1
: 2
: IPv4
: 0.0.0.0
: IfIndex
: 1.3.6.1.4.1.171.10.117.1.1
: IPv4
: 10.90.90.90
: IfIndex
: 1.3.6.1.4.1.171.10.117.1.1
: 0
: 1
: 1
: default
: 0
:
: Supported
: Enabled
: 0010(hex)
:
: Aggregated
: Not Currently in Aggregation
565