D-Link xStack DGS-3120 Series Cli Reference Manual page 802

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
80-17 show pim rpset
Description
This command is used to list all the RPset information.
Format
show pim rpset
Parameters
None.
Restrictions
None.
Example
To list all the RPset information:
DGS-3120-24TC:admin#show pim rpset
Command: show pim rpset
PIM RP-Set Table
Bootstrap Router: 10.54.71.9
Group Address
------------------ ------------------ --------- ------------ ------
224.0.0.0/4
224.0.0.0/4
Total Entries: 2
DGS-3120-24TC:admin#
80-18 create pim register_checksum_include_data rp_address
Description
This command is used to decide the checksum in register packet will include the data portion or
not. As defined in RFC 4601, the checksum for Registers is done only on the first 8 bytes of the
packet, including the PIM header and the next 4 bytes, excluding the data packet portion. Some
earlier PIM-SM routers will calculate checksum for register packet including data portion. This
configuration makes our routers communicate with those earlier routers smoothly. The default set
is not including data portion.
RP Address
10.20.6.36
10.54.71.9
797
Holdtime Expired Time Type
210 196
0 0
Dynamic
Static