D-Link xStack DGS-3120 Series Cli Reference Manual page 572

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
Parameters
<portlist> - (Optional) Specified a range of ports to be configured. When port list is not specified,
information for all ports will be displayed.
mode – (Optional) Specify to display the information in various modes.
brief - Display the information in brief mode.
normal - Display the information in normal mode. This is the default display mode.
detailed - Display the information in detailed mode.
Restrictions
None.
Example
To display remote table in brief mode:
DGS-3120-24TC:admin#
Command: show lldp remote_ports 1:1-1:2 mode brief
Port ID: 1
----------------------------------------------------------------------
Remote Entities count : 3
Entity 1
Chassis ID Subtype
Chassis ID
Port ID Subtype
Port ID
Port Description
Entity 2
Chassis ID Subtype
Chassis ID
Port ID Subtype
Port ID
Port Description
Port ID : 2
---------------------------------------------------------------------
Remote Entities count : 3
Entity 1
Chassis ID Subtype
Chassis ID
Port ID Subtype
Port ID
Port Description
Entity 2
Chassis ID Subtype
Chassis ID
Port ID Subtype
Port ID
Port Description
show lldp remote_ports 1:1-1:2 mode brief
: MACADDRESS
: 00-01-02-03-04-01
: LOCAL
: 1/3
: RMON Port 1 on Unit 3
: MACADDRESS
: 00-01-02-03-04-02
: LOCAL
: 1/4
: RMON Port 1 on Unit 4
: MACADDRESS
: 00-01-02-03-04-03
: LOCAL
: 2/1
: RMON Port 2 on Unit 1
: MACADDRESS
: 00-01-02-03-04-04
: LOCAL
: 2/2
: RMON Port 2 on Unit 2
567