D-Link xStack DGS-3120 Series Cli Reference Manual page 667

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
all - All multicast address profiles will be deleted.
profile_name - Specify to display a profile based on the profile name.
<name 32> - Enter the profile name value here. The profile name can be up to 32 characters
long.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete the multicast address profile with a profile ID of 3:
DGS-3120-24TC:admin# delete mcast_filter_profile profile_id 3
Command: delete mcast_filter_profile profile_id 3
Success.
DGS-3120-24TC:admin#
To delete the multicast address profile called MOD:
DGS-3120-24TC:admin# delete mcast_filter_profile profile_name MOD
Command: delete mcast_filter_profile profile_name MOD
Success.
DGS-3120-24TC:admin#
65-5 show mcast_filter_profile
Description
This command is used to display the defined multicast address profiles. If the IPv4 or IPv6 option
is not specified, IPv4 is implied.
Format
show mcast_filter_profile {[ipv4 | ipv6]} {[profile_id <value 1-24> | profile_name <name 32>]}
Parameters
ipv4 - (Optional) Specify to delete an IPv4 multicast profile.
ipv6 - (Optional) Specify to delete an IPv6 multicast profile.
profile_id - (Optional) Specify the ID of the profile
<value 1-24> - Enter the profile ID value here. This value must be between 1 and 24.
profile_name - (Optional) Specify to display a profile based on the profile name.
<name 1-32> - Enter the profile name here. The profile name can be up to 32 characters long.
Restrictions
None.
662