D-Link xStack DGS-3120 Series Cli Reference Manual page 999

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3120-24TC:admin#
Command: show sim neighbor
Neighbor Table
Port MAC Address
------ ------------------
23 00-35-26-00-11-99
23 00-35-26-00-11-91
24 00-35-26-00-11-90
Total Entries: 3
DGS-3120-24TC:admin#
102-4 reconfig
Description
This command is used to re-telnet to member.
Format
reconfig [member_id <value 1-32> | exit]
Parameters
member_id - Specify the serial number of the member.
<value 1-32> - Enter the serial number of the member here.
exit - Specify to exit from the telnet session.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To re-telnet to member:
DGS-3120-24TC:admin# reconfig member_id 1
Command: reconfig member_id 1
DGS-3120-24TC:admin#
Login:
102-5 config sim_group
Description
This command is used to configure group information.
show sim neighbor
Role
---------
Commander
Member
Candidate
994