D-Link xStack DGS-3120 Series Cli Reference Manual page 869

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the RIP timers:
DGS-3120-24TC:admin#config rip timers update 60 timeout 360 garbage_collection
240
Command: config rip timers update 60 timeout 360 garbage_collection 240
Success.
DGS-3120-24TC:admin#
87-5 show rip
Description
This command is used to display the RIP configuration for one or all IP interfaces.
Format
show rip {ipif <ipif_name 12>}
Parameters
ipif - (Optional) Specify the IP interface name used for this configuration.
<ipif_name 12> - Enter the IP interface name used here. This name can be up to 12
characters long.
If no parameter is specified, the system will display RIP configuration and statistics for all the IP
interfaces.
Restrictions
None.
Example
To display RIP configuration and statistics for all IP interfaces.
864