D-Link xStack DGS-3120 Series Cli Reference Manual page 82

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3120-24TC:admin# delete authen server_group mix_1
Command: delete authen server_group mix_1
Success.
DGS-3120-24TC:admin#
5-21 show authen server_group
Description
This command is used to display the authentication server groups.
Format
show authen server_group {<string 15>}
Parameters
<string 15> - (Optional) The built-in or user-defined server group name. This value can be up to
15 characters long.
Restrictions
Only Administrator-level users can issue this command.
Example
To display all authentication server groups:
DGS-3120-24TC:admin# show authen server_group
Command: show authen server_group
Group Name IP Address
--------------- ---------------
mix_1 10.1.1.222
10.1.1.223
radius 10.1.1.224
tacacs 10.1.1.225
tacacs+ 10.1.1.226
xtacacs 10.1.1.227
Total Entries : 5
DGS-3120-24TC:admin#
5-22 create authen server_host
Description
This command is used to create an authentication server host. When an authentication server host
is created, IP address and protocol are the index. That means over 1 authentication protocol
Protocol
--------
TACACS+
TACACS
RADIUS
TACACS
TACACS+
XTACACS
77