D-Link xStack DGS-3120 Series Cli Reference Manual page 654

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
MLD v1 Report
MLD v2 Report
MLD v1 Done
Total
Total Entries : 1
DGS-3120-24TC:admin#
63-19 clear mld_snooping statistic counter
Description
This command is used to clear MLD snooping statistics counters.
Format
clear mld _snooping statistics counter
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To clear MLD snooping statistics counter:
DGS-3120-24TC:admin#
Command: clear mld_snooping statistic counter
Success.
DGS-3120-24TC:admin#
63-20 config mld_snooping rate_limit
Description
This command is used to configure the rate limit of MLD control packets that are allowed by each
port or VLAN.
Format
config mld_snooping rate_limit [ports <portlist> | vlanid <vlanid_list>] [<value 1-1000> |
no_limit]
: 0
: 10
: 1
: 11
clear mld_snooping statistic counter
649