D-Link xStack DGS-3120 Series Cli Reference Manual page 643

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
Command: show mld_snooping
MLD Snooping Global State
VLAN Name
Query Interval
Max Response Time
Robustness Value
Last Listener Query Interval
Querier State
Querier Role
Querier IP
Querier Expiry Time
State
Fast Done
Rate Limit(pkt/sec)
Proxy Reporting
Proxy Reporting Source IP
Version
Total Entries: 1
DGS-3120-24TC:admin#
63-8 show mld_snooping group
Description
This command is used to display the current MLD snooping group information on the Switch.
Format
show mld_snooping group {[vlan <vlan_name 32> | vlanid <vlanid_list> | ports <portlist>]
{<ipv6addr>}} {data_driven}
Parameters
vlan - (Optional) Specify the name of the VLAN for which you want to view MLD snooping group
information. If VLAN and ports and IP address are not specified, the system will display all
current IGMP snooping group information.
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters
long.
vlanid - (Optional) Specify the ID of the VLAN for which you want to view MLD snooping group
information.
<vlanid_list> - Enter the VLAN ID list here.
ports - (Optional) Specify a list of ports for which you want to view MLD snooping group
information.
<portlist> - Enter the list of port here.
<ipv6addr> - (Optional) Specify the group IPv6 address for which you want to view MLD
snooping group information.
data_driven - (Optional) Display the data driven groups.
: Disabled
: default
: 125
: 10
: 2
: 1
: Disabled
: Non-Querier
: ::
: 0 secs
: Disabled
: Disabled
: No Limitation
: Disabled
: ::
: 2
(EI and SI Mode Only)
638