D-Link xStack DGS-3120 Series Cli Reference Manual page 450

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
Format
config router_ports_forbidden [ <vlan_name 32> | vlanid <vlanid_list> ] [add | delete]
<portlist>
Parameters
<vlan_name 32> - Specify the name of the VLAN on which the router port resides.
vlanid - Specify the ID of the VLAN on which the router port resides.
<vlanid_list> - Enter the VLAN ID list here.
add - Specify to add the router ports.
delete - Specify to delete the router ports.
<portlist> - Specify a range of ports to be configured.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To set up port range 1-10 to forbidden router ports of default VLAN:
DGS-3120-24TC:admin# config router_ports_forbidden default add 1:11-1:12
Command: config router_ports_forbidden default add 1:11-1:12
Success.
DGS-3120-24TC:admin#
42-7 enable igmp_snooping
Description
This command is used to enable IGMP snooping on the Switch.
Format
enable igmp_snooping
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable IGMP snooping on the Switch:
445