D-Link xStack DGS-3120 Series Cli Reference Manual page 373

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
Format
disable dvmrp
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable DVMRP:
DGS-3120-24TC:admin#disable dvmrp
Command: disable dvmrp
Success.
DGS-3120-24TC:admin#
30-4 show dvmrp
Description
This command is used to display DVMRP configurations.
Format
show dvmrp {ipif <ipif_name 12>}
Parameters
ipif - (Optional) Specify the IP interface name used for the display.
<ipif_name 12> - Enter the IP interface name used for the display here. This name can be up
to 12 characters long.
If no parameter is specified, then all the IP interfaces will be displayed.
Restrictions
None.
Example
To display DVMRP configurations:
368