D-Link xStack DGS-3120 Series Cli Reference Manual page 347

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
Example
To enable the Filter DHCPv6 Server log state:
DGS-3120-24TC:admin#config filter dhcpv6_server log enable
Command: config filter dhcpv6_server log enable
Success.
DGS-3120-24TC:admin#
27-7 config filter dhcpv6_server ports
Description
This command is used to configure the state of filter DHCPv6 server packets on the switch. The
filter DHCPv6 server function is used to filter the DHCPv6 server packets on the specific port(s)
and receive the trust packets from the specific source. This feature can be protected network
usable when a malicious host sends the DHCPv6 server packets.
Format
config filter dhcpv6_server ports [<portlist> | all] state [enable | disable]
Parameters
<portlist> - Enter the list of ports, used for this configuration, here.
all - Specify that all ports will be used for this configuration.
state - Specify whether the port's filter DHCPv6 server function is enabled or disabled.
enable - Specify that the filter option is enabled.
disable - Specify that the filter option is disabled.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the filter DHCPv6 server state to enabled for ports 1:1 to 1:8:
DGS-3120-24TC:admin#config filter dhcpv6_server ports 1:1-1:8 state enable
Command: config filter dhcpv6_server ports 1:1-1:8 state enable
Success.
DGS-3120-24TC:admin#
27-8 config filter dhcpv6_server trap
Description
This command is used to enable or disable the filter DHCPv6 server trap state.
342