D-Link xStack DGS-3120 Series Cli Reference Manual page 890

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3120-24TC:admin# show ipfdb
Command: show ipfdb
Interface IP Address
------------ ---------------
System 10.1.1.101
System 10.1.40.22
System 10.2.27.250
Total Entries: 3
DGS-3120-24TC:admin#
89-17 show route preference (RI Mode Only)
Description
This command is used to display the route preference setting.
Format
show route preference {[local | static | default | rip | ospf | ospfIntra | ospfInter | ospfExt1 |
ospfExt2]}
Parameters
local - (Optional) Display the preference of local route.
static - (Optional) Display the preference of static route.
default - (Optional) Display the preference of default route.
rip - (Optional) Display the preference of RIP route.
ospf - (Optional) Display the preference of OSPF route.
ospfIntra - (Optional) Display the preference of OSPF intra-area route.
ospfInter - (Optional) Display the preference of OSPF inter-area route.
ospfExt1 - (Optional) Display the preference of OSPF external type-1 route.
ospfExt2 - (Optional) Display the preference of OSPF external type-2 route.
Restrictions
None.
Example
To display the route preference for all route types:
Port Learned
------ ---------
1:3 Dynamic
1:3 Dynamic
1:3 Dynamic
885