D-Link xStack DGS-3120 Series Cli Reference Manual page 632

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the MLD proxy:
DGS-3120-24TC:admin#disable mld_proxy
Command: disable mld_proxy
Success.
DGS-3120-24TC:admin#
62-3 config mld_proxy downstream_if
Description
This command configures the MLD proxy downstream interfaces. The MLD proxy plays the server
role on the downstream interfaces. The downstream interface must be an MLD Snooping enabled
VLAN.
Format
config mld_proxy downstream_if [add | delete] vlan [<vlan_name 32> | vlanid <vidlist>]
Parameters
add - Specify to add a downstream interface.
delete - Specify to delete a downstream interface .
vlan - Specify the VLAN by name or ID.
<vlan_name 32> - Specify a name of VLAN which belong to the MLD proxy downstream
interface. The maximum length is 32 characters.
vlanid - Specify a list of VLAN IDs which belong to the MLD proxy downstream interface.
<vidlist> - Specify a list of VLAN IDs which belong to the MLD proxy downstream
interface.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the MLD Proxy's downstream interface:
627